PMT 130/40R6.5 STRADALE

PRICE IS PER EACH TIRE!

This tire is for wide wheel Scooter (WEPED )or your custom built scooter requiring a 5 inch or wider tire. 

-WARRANTY FOR ALL PMT TIRES: PMT TIRES ARE HELD AT THE HIGHEST MANUFACTURING METHODS AND TESTED IN THE FACTOY FOR DEFECTS. TIRES WILL HAVE A MANFUCTURE DEFECT WARRANY ONLY, THIS DOES NOT INCLUDE ANY ROAD HARZARDS.

-IN THE EVENT YOU HAVE AN ISSUE PLEASE CONTACT US VIA EMAL SO WE CAN RESLOVE THE PROBLEM YOU MAY HAVE. IN MOST CASES IF YOU ARE FEELING A “WOBBLE” THIS IS DUE TO THE BEAD NOT SEATED OR THE TIRE INCORRECTLY INSTALLED. THIS IS EVEN IF YOUR ORGINIAL TIRES DID NOT DO THIS, THAT’S DUE TO MOST OE TIRES ARE NYLON AND DO NOT GIVE YOU THE AMOUNT OF ROAD FEEL OF A PMT. IN OTHER CASES THE MOTOR BEAD SURFACE SLIGHTLY SMALLER AND CAUSE THE TIRE-TO-BEAD TO HAVE SLOP. WE CAN HELP WALK YOU THIUGH THIS IN THE EVENT YOU HAVE THIS ISSUE.  

-IN MOST CASES TIRE CHANGES CAN BE PERFORMED AT HOME WITH TIRE SPOONS AND CORRECT METHODS FOR MOUNTING. WE DO SUGGEST IF YOU DON’T FEEL COMFORTABLE WITH MOUNTING PLEASE FIND A E-SCOOTER SHOP WITH THE CORRECT EQUMENT (LIKE OURS!) IF YOU CAN NOT SEAT THE BEAD PLEASE REMOVE VALVE STEM CORE, LUBE BEAD AND USE AIR COMPRESSOR AIR TO INFLATE. SOMETIMES YOU MAY NEED TO USE A RATCHET SRAP AROUND THE CIRCUMFERENCE OF THE TIRE OR A TIRE CHEETA/BLASTER TO INFLATE. WE HAVE NEVER NOT BEEN ABLE TO SEAT THE BEAD ON ANY E-SCOOTER. IF YOU HAVE ANY ISSUES PLEASE EMAIL OR CALL US PER THE INFO ON OUR WEBSITE.

-TIP FOR IF YOUR E-SCOOTER USES TUBES, ALL PMT TIRES CAN BE USED WITH TUBES, WE SUGGEST A NEW TUBE AND USE BABY POWDER COATED ON THE TUBE TO HELP REDUCE FRICTION INSIDE THE TIRE. THIS WILL HELP PREVENT TUBE PINCHS.

-RETURNS WILL ONLY BE EXCEPTED IF TIRE WAS NOT MOUNTED AND OR SEEN PAVEMENT, ALL TIRES WILL BE INSPECT WHEN RETURNED. THEN REFUND FOR THE TIRES ONLY WILL APPLY.

 

Type

130/40 R6.5

Tread Pattern

Urban

Hardness Compound

65 Shore A

Tyre Width

130 mm

Outer diameter

270 mm

Tread Pattern Use

Road

Compound Use

Universal

Rim Width

105 – 115 mm

Pressures

20-29 PSI